Product Spotlights
Jergens MT-S System
|
The MT-S spindle gripper allows continued machine cycles by picking and placing finished components in a temporary part loading tray located on the machine table.
Functioning as a first level automation solution-without a robot-MT-S is stored in the tool magazine like any tool and engaged at the end of each cycle. Depending on the part size and configuration, many pieces can be machined and stored with little or no operator intervention. Pre-machined parts are loaded, machined and placed (unloaded) by MT-S, allowing a continuous cycle until the part loading tray is full. An easy-to-adjust gripping force plus counterbalance function helps ensure that all components are optimally protected. MT-S comes with several gripper styles and easy to change inserts that match part geometrical needs. The unit's power source can be either pneumatic (air through the spindle) or hydraulic (coolant supply). The spindle gripper reduces set-up times for small- to medium-sized batches of workpieces up to 17.6 lbs. (8 kg). |
|
Carmex's G6
|
|
These tools should be of interest to anyone interested in high-volume, cost-efficient machining using Swiss-type/Screw machines. They are capable of processing a wide array of applications. This video demonstrates the operation of several different tools from this family (all with six cutting edges, also known as G6). The following applications are shown: Front Turning, Grooving, Back Turning, Threading, Parting. For more details regarding the Swiss-Line family of tools (including the G6 inserts shown in the video), please visit the following link: http://carmexusa.com/contentonly.aspx?file=pdf/2019_Inch/129-161_swiss_line.pdf
|
Rego-Fix reCool
reCool gets you more for lessreCool enables customers to produce high-quality parts in less time with lowered costs. Our cooling solution is retrofittable for any turning machine and lathe. This is why reCool offers great potential for almost all manufacturers.
Reduction of machine downtime is a major goal in production simply because downtime means loss of profits. Internal cooling with reCool increases your tool life. Thus, effectively reducing not only tool costs but also downtime. |
|
Rego-Fix powRgrip
|
|
New approach to improving tool life!The powRgrip System provides excellent runout, high vibration dampening as well as easy and secure handling for demanding high-speed milling and drilling.
With a clamping range starting at 0.2 mm and a total system runout TIR of less than 3 μm, powRgrip meets your high performance demands. |
Total system runout TIR ≤ 3 μm at 3 x D
|
Excellent vibration dampening
|
Tool ready for use in less than 10 seconds
|
Maximum clamping force and low runout, even after 20,000 tool changes.
|
