Promotions

Vertical Divider

With Get More Work
Out The Door For Less

YOU get more with our 30 & FREE promotion. Get a FREE steel holder with every 30 i-Xmill carbide inserts that you purchase. Click the image below for all the details.

New UPS Rates for Great Savings!

Carmex has new UPS rates for their customers. Look below for more informaiton.

Save 20% on the FMT-MT Thread Mill

Save 20% on the Carmex FMT-MT Thread Mills. This tool doubles the flutes, shortens cycle times, and offers longer tool life with the high-temperature coating.

Push Productivity Higher with the
ONLY ONE PM60 Endmill Kits

Don’t fear unstable cutting conditions. ONLY ONE end mills provide unbridled performance that won’t fade in the long runs. Compared to HSS Co8 and solid carbide, ONLY ONE can take the vibrations – without fear of chipping – and get the job done. With YG-1’s unique PM60 coating that provides 12% more cobalt than most competitors, ONLY ONE end mills not only out-perform the competition, they outlast them, too.

With 3 kits to choose from, each kit is specially priced and includes 1 free 1/2" endmill that comes with a specially packed application card inside . These kits are GREAT for tool rooms, technical schools, and MRO facilities.

GYG65KIT7 - ONLY ONE PM60, 4 flute, 30 degree helix, center cutting, regular length end mill. The sizes in this kit: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2"(2).

GYG66KIT7 - ONLY ONE PM60, 4 flute, multiple helix, center cutting, regular length end mill. The sizes in this kit: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2"(2).

GYG68KIT5 - ONLY ONE PM60, 6 flute, 30 degree helix, center cutting, roughing (fine) end mill. The sizes in this kit: 3/8", 5/8", 3/4", 1/2"(2).

Ceramic Milling Promo Pack

Do you have some challenging parts that you would like to speed up, or would you like to move from carbide to ceramic? NTK Cutting Tools is the leader in ceramic tooling and we can help you increase you profits by helping you reduce your cycle time. Check out this promo now. Click the image below for all the details.

Rougher & Finisher All In One!

YG-1's FM10 PNMU Face Mill is a milling platform that combines multi-corner face milling performance with high feed capabilities. For a LIMITED TIME savings from list price up to 39%.

Free Body with 10 Inserts

CMT Vertical Milling system uses ground profile inserts for high precision, excellent performance, working at high machining parameters, high surface quality, solid and accurate clamping method for repeatability. The CMT system allows for partial profile threads, full profile threads, chamfering, grooving, face milling, and corner rounding inserts. There are steel and carbide shanks tool holders.

Threading Insert Kits for $99

Each kit contains 10, 3/8" IC insert, and 2 inserts with the following pitches - 12, 14, 16, 18, and 20 pitch. The inserts fit all standard threading holders with a 3/8" IC.

FREE Holder with the Purchase of Inserts

Purchase so many inserts and get a FREE HOLDER! Between the Swiss Line, G6, Polygon, and the Tiny Tools, we have your swiss needs covered.

powRgrip Promo Pack!

Are you looking for a better tooling holding solutions? Rego-Fix has it with their powRgrip system. This start-up package is a great way to start. Their are several tool holder options (CAT40, BT30, HSK63A HSK40E) that are available. The package comes with the PGC-A , 5 tool holders, and 10 collets. Check out this promo now. Click the image below for all the details.

Chip Control By Gravity

Are you having challenges with chips wrapping around your parts in your Swiss machine? If so, then this could be the right tool for you. This Promo Pack consists of a coolant thru tool holder and 4 inserts. Click the image below for all the details.